Why kerf matters.
The beam has width, so a cut removes a little material. Good laser programs offset the path by half the kerf so the finished part matches your drawing, which is why you should draw parts at their final size and let the shop handle the offset.
Kerf matters most where parts fit together: tabs and slots, press fits, nested inserts and small holes.
Fiber laser kerf.
Fiber lasers cut with a very narrow kerf compared with plasma or waterjet, which means sharper corners, smaller holes and tighter fits. Kerf grows a little with material thickness.
Design tips.
Draw parts at final size. Give tab-and-slot joints a small clearance. Keep holes at least as large as the material is thick. If a fit is critical, call it out on your drawing and we'll hold it.
Questions.
Do I need to compensate for kerf in my DXF?
No. Draw the part at its finished size. We offset the cutting path for kerf.
Is fiber laser kerf narrower than plasma?
Yes. Fiber lasers cut a much narrower kerf than plasma, which gives cleaner edges and tighter features.
So, what do you want to build?
Send a model, a drawing or a napkin sketch. We'll price the part, the program or the whole product.