2B or #4?
2B is the smooth, slightly reflective mill finish most stainless leaves the mill with. It's the right choice for most parts, especially ones that get welded or hidden.
#4 is a brushed finish for parts people see and touch: covers, panels, trim and equipment fronts. Tell us which side shows and which way the grain should run on your drawing.
Cutting and bending 304.
Nitrogen-assist cutting leaves a clean, oxide-free edge that TIG welds without grinding. 304 springs back more than mild steel, so we bend it with our own tooling values, and FoxQuote checks every bend against our 70-ton press brake.
Where 304 is used.
Enclosures, covers, guards, brackets, food and beverage equipment, medical and lab parts, signs and architectural trim. For salt, chlorides or chemicals, choose 316.
| Thickness | Inches | Weight (lb/ft²) |
|---|---|---|
| 20 ga | 0.0375 | 1.56 |
| 18 ga | 0.05 | 2.08 |
| 16 ga | 0.0625 | 2.60 |
| 14 ga | 0.0781 | 3.25 |
| 11 ga | 0.125 | 5.20 |
| 3/16 in | 0.188 | 7.80 |
| 1/4 in | 0.250 | 10.40 |
| 3/8 in | 0.375 | 15.61 |
Questions.
What is the difference between 2B and #4 stainless?
2B is the smooth mill finish; #4 is a brushed, directional finish for visible parts.
How thick can you laser cut stainless?
Up to 3/8 in on our 4 kW fiber laser.
Is 304 stainless food safe?
304 is widely used for food and beverage equipment. Check the requirements your application must meet.
Should I use 304 or 316?
304 for most parts; 316 when parts see salt water, de-icing salt, chlorides or chemicals.
How do I get a price?
Upload a STEP, SolidWorks or DXF file to FoxQuote and choose the material and thickness. You get a price at every quantity in about 10 seconds, with no login. A drawing alone is quoted by our team.
So, what do you want to build?
Send a model, a drawing or a napkin sketch. We'll price the part, the program or the whole product.
